| Detailed Product Description： | <>
A large part of slag brick the user needs to do internal combustion. Moisture content of materials needed large internal combustion slag, slag, after less than expected, the blocking screen. Slag is not complete, the slag out of the particles is relatively large. Combustion can not do. Liu Hong Ji mechanical engineer to see the problem, after two years of painstaking research finally worked out a machine to completely slag slag slag --- Hong Ji (also known as Hong Ji slag, slag machine with top and bottom levels, not the bottom screen, older than the traditional material fineness of slag out of the low, the use of noise, energy saving convenience, 1 slag mill equivalent to the previous 2 sets of old mill tailings
【Slag mill factory introduction:】
http://www.gyhjjx.com) After my numerous Hong Ji Machinery Plant Research and Improvement, has been perfectly both the functional and the production of a lot stronger than similar devices, we do not need to brag about, is really about forces, I believe we must buy our slag is the last choice, our sales objectives, selling a device to make a friend. For every friend sincerely warm service.
【Description】 slag crusher
Slag grinder at affordable prices and efficient production of the material particle size and fast way to get rich into the small and medium enterprises, SMEs are also the hearts of a good user reputation, slag slag mill machinery and equipment currently on the market a very hot slag 'broken coal products, slag is a slag mill tailings from the mill before the old single-class upgrades made to solve the old slag slag slag mill grinder with a screen grate to demand the end of the material fineness defects in material fineness have resorted to greater breakthroughs, but also higher water content in the materials break without any requirement of coal, slag mill is characterized by low cost, high yield, breaking coal effect, adjustable internal hammer to freely control the number and location of the material fineness, where we guarantee a minimum discharge of slag fineness crusher can reach 2MM (mm) The following accounts for about 90%, 2MM (mm) The following accounts for about 60%, mainly the unconditional return.
』『 Improved slag mill
Slag crusher has replaced the earlier single-stage end of the slag grinder the perfect screen to solve difficult problems of coal breaking humidity material present, I slag grinder Hong Ji unique design made simple and convenient processes are working fine after all the relevant departments to detect and safety testing before approving the factory slag mill. For individual users and small and medium enterprises are the most effective investment. Effectively saving the customer the cost of purchase of equipment. The slag mill equipment, high output with low noise and small package and easy to maintain and not require special equipment installed immediately start to use.
』『 Main features of mill tailings
⊙ double slag hammer mill up and down within the stone chamber collide with each other so that the material broken coal slag fineness lower.
⊙ special hammer mill slag production process to enhance the hardness of the hammer hammer than the average life expectancy increased by 2 to 3 times.
⊙ slag crusher gap adjustment of special two-way technology can control the fineness of slag materials enhanced hammer
⊙ slag mill grease lubrication system reform focus to the oil nozzle configuration step of operating multiple distribution pump oil.
⊙ slag mill equipment running smoothly no major noise power increased rotational inertia to overcome the resistance movement can save 20%.
⊙ slag mill on the moisture content of the material not strictly required greatly reduced
⊙ mill slag powder can not be discharged there is no problem of duplication of slag hammer to prevent wear and tear is not valid.
⊙ Hong Ji slag mill quality first, reputation first concept to business, never be surpassed.
『Detailed parameter』 slag mill
Type: SCF600x400
Feed: ≤ 150 毫米
Discharge: ≤ 2 mm (2 mm below about 80% or more)
Yield :15-25 tons / hour Hong Ji slag slag mill grinder and other differences between
Motor: 18.5 kW -4 level +18.5
Size: 2665x725x1698 mm
Type: SCF600x600
Feed: ≤ 200 毫米
Discharge: ≤ 2 mm (2 mm below about 80% or more)
Yield :25-35 tons / hour
Motor: 22 +22 kW -4 level
Size: 2760 × 1280 × 1750 毫米
Type: SCF600x800:
Feed: ≤ 360 mm:
Discharge: ≤ 2 mm (2 mm below about 80% or more)
Yield :50-70 tons / hour
Motor: 45 +45 (37) kW -4 level
Size: 3625x1314x2065 mm
Type: SCF800x1000
Feed: ≤ 600 毫米
Discharge: ≤ 2 mm (2 mm below about 80% or more)
Output :150-300 / 230-500 tons / hour
Motor: 90 +75 kW -4 level
Size: 4500x1700x3150 mm
"Hong Ji Mechanical Contact"
Sales Headquarters: 0371-64428176
A :0371 -64428458 sales
Business Contact: 13673670117
13525575430
Company website: http://www.henanlj.com/
http://www.gyhjjx.com
http://www.fensuijiwang.cn/ (Peng Yuan Machinery)
http://www.gyltjx.cn/ (Dragon Machinery)
II |
| No.8116116
