| Detailed Product Description： | <>
A large part of slag brick the user needs to do internal combustion. Moisture content of materials needed large internal combustion slag, slag, after less than expected, the blocking screen. Slag is not complete, the slag out of the particles is relatively large. Combustion can not do. Liu Hong Ji mechanical engineer to see the problem, after two years of painstaking research finally worked out a machine to completely slag slag slag --- Hong Ji (also known as Hong Ji slag, slag machine with top and bottom levels, not the bottom screen, older than the traditional material fineness of slag out of the low, the use of noise, energy saving convenience, 1 old-fashioned pulverized coal unit equivalent to the previous 2 sets of machines
【Coal depot CLC:】
) After I Machinery Factory Hong Ji numerous research and improvement, is now perfectly both the functional and the production of a lot stronger than similar devices, we do not need to brag about, really about is power, I believe we must buy our slag is the last choice, our sales objectives, selling a device to make a friend. For every friend sincerely warm service.
【Description】 coal machine
Pulverized coal unit at a low price, efficient production of the material particle size and get rich quick way into the small and medium enterprises, SMEs are also the hearts of a good user reputation, slag coal machine currently on the market in the machinery and equipment a very hot slag 'broken coal products, coal slag from the previous vintage machine is a single-stage machine upgrades from coal, slag pulverized coal unit to solve the old machine with a screen grate to demand the end of the material fineness defects in material fineness have resorted to greater breakthroughs, but also higher water content in the materials break without any requirement of coal, pulverized coal unit is characterized by low cost, high yield, breaking coal effect, adjustable internal hammer to freely control the number and location of the material fineness, where we guarantee the lowest discharging coal fineness machine can reach 2MM (mm) The following accounts for about 90%, 2MM (mm) The following accounts for about 60%, mainly the unconditional return.
Improvement of coal Machine 』『
Pulverized coal unit replaces the earlier single-stage machine has a perfect screen at the end of the pulverized coal to solve the humidity problem of material present, I broke hard coal produced coal Hong Ji unique design is simple and convenient machines work fine after all the processes are detected and the relevant departments safety testing before approving the factory coal machine. For individual users and small and medium enterprises are the most effective investment. Effectively saving the customer the cost of purchase of equipment. The high yield of pulverized coal machine equipment with low noise equipment package size and easy to maintain and requires no special installation immediately start to use.
Main characteristics of pulverized coal 『』
⊙ coal machine bore down within the stone hammer double collision broken coal slag fineness of materials lower.
⊙ coal machine special production process to hammer hammer hammer than ordinary life to enhance the hardness increased by 2 to 3 times.
⊙ coal machine special two-way technology transfer gap control of the fineness of slag material enhanced hammer
⊙ coal machine lubrication system grease mouth configuration set to transform the oil distribution pump oil multi-step operation.
⊙ coal machine equipment running smoothly no major noise power increased rotational inertia to overcome the resistance movement can save 20%.
⊙ coal machine to the material not strictly required moisture content greatly reduced
⊙ coal powder machine does not exist can not be discharged in time to eliminate the problem of slag hammer repeated wear and tear is not valid.
⊙ Hong Ji coal machine to quality first, reputation first concept to business, never be surpassed.
『Detailed parameter』 coal machine
Type: SCF600x400
Feed: ≤ 150 毫米
Discharge: ≤ 2 mm (2 mm below about 80% or more)
Yield :15-25 tons / hour Hong Ji pulverized coal machine and other machines the difference
Motor: 18.5 kW -4 level +18.5
Size: 2665x725x1698 mm
Type: SCF600x600
Feed: ≤ 200 毫米
Discharge: ≤ 2 mm (2 mm below about 80% or more)
Yield :25-35 tons / hour
Motor: 22 +22 kW -4 level
Size: 2760 × 1280 × 1750 毫米
Type: SCF600x800:
Feed: ≤ 360 mm:
Discharge: ≤ 2 mm (2 mm below about 80% or more)
Yield :50-70 tons / hour
Motor: 45 +45 (37) kW -4 level
Size: 3625x1314x2065 mm
Type: SCF800x1000
Feed: ≤ 600 毫米
Discharge: ≤ 2 mm (2 mm below about 80% or more)
Output :150-300 / 230-500 tons / hour
Motor: 90 +75 kW -4 level
Size: 4500x1700x3150 mm
"Hong Ji Mechanical Contact"
Sales Headquarters:
Sales:
Business Contact:
Website: /
/ (Peng Yuan Machinery)
/ (Dragon Machinery)
II |
| No.8116116
